Part Number: 72071

Kentrox Universal Power Alarm Brick

This ADC Kentrox 100 Watt power supply is for use with a Universal Power Tray.

Part Number: 72071

Part Number: 72075

ADC Kentrox Universal Power Supply 200 W/ 100W Red, 2-110V

This power supply is intended for use with the 12-Slot Universal Shelves. It allows you to plug the Universal Shelf into a 120VAC power supply.

Part Number: 72075

• Has 100W of power for up to (2) shelves
• Can use it on a shelf to create a redundant power supply

Part Number: 72681

Kentrox Datasmart 681 56K 64K DDS SA Framevision AC DSU CS

The DataSMART 681 helps identify application delays caused by dropped packets in the network, allowing for faster problem resolution.

Part Number: 72681

• Combined with the DataSMART T1 Frame Monitoring DSU/CSUs

Part Number: 72696

Kentrox Datasmart 696 T1 SA Framevision AC DSU CSU

DataSMART Frame Monitoring DSU/CSUs maximize your network uptime with convenient management features, such as in-band access for simplified remote management. By operating at the network access point, DataSMART DSU/CSUs offer independent and objective visibility of the network to help identify the true source of performance problems and the best resolution.

Part Number: 72696

• Includes a front-panel LCD for easy local management
• Embedded, standards-based SNMP and an integrated Ethernet port ensure easy central management

Part Number: 77020

Kentrox 12 Slot Shelf

This product is a CSU standard shelf with (12) slots. It is intended for use with the T-SMART Intelligent CSU, the T-SERV II CSU, and the E-SMART Intelligent CSU.

Part Number: 77020

• Mounted Shelf
• Allows for expansion

Part Number: 77030

Kentrox 4 Slot Standard

The unit provides in-service monitoring of both ESF and SF (D4) networks for early detection of developing problems. Both network and terminal sides are monitored. The performance results of the last 24 hours, stored in 15-minute intervals, can be accessed with an ASCII terminal. The T-SMART can automatically dial up, via modem, your network management center to report alarm conditions. Problems can be further isolated and diagnosed using user-selectable loopback tests and a built-in test signal generator. Network and terminal sides can be independently configured for ESF or SF and B8ZS or AMI. The T-SMART CSU will then automatically convert signals as necessary.

Part Number: 77030

• Fully compatible with AT&T TRs 54016 and 62411, ANSI T1.403 ESF standards

Part Number: 77092

Kentrox Power Supply, Rack Mount, 48VDC, 1.25A

This ADC Kentrox (77092) power supply unit provides power of 30 watts.

Part Number: 77092

• Rack Mounted

Part Number: 77101-L1

Kentrox SIU Board

The SIU provides the interface between the shelf-mounted T-SMART Diagnostic Channel Service Units (CSUs) and the operator's control terminal or automated Network Management System (NMS). The SIU provides the electrical interface between shelves, so that up to 184 units in several shelves can be addressed by one controlling terminal or NMS. Multiple shelves (up to 16) can be chained together in one site using the IN and OUT ports.

Part Number: 77101-L1

• T-smart & E-smart shelf interface w/code generator
• Provides Control for up to 2 Shelves (23 CSU's)

Part Number: 77102L1

Kentrox Rack Mount GCU Board

The Group Controller Unit (GCU) provides control access to large numbers of T-SMART and E-SMART CSUs in shelf applications. You can interconnect up to (255) shelf groups at the same site or different sites, and manage all the ICSUs with one control device.

Part Number: 77102L1

• Provides flexible control of an increased number of ICSUs and expanded alarm reporting capabilities

Part Number: 77115L2

Kentrox T-Serve II L2 Card Insert

The T-SERV II CSU is a proven, cost-effective Channel Service Unit (CSU) for terminating T1 and PRI circuits. Offering high reliability and flexible configuration options. All basic CSU functions are contained in the T-SERV II CSU, including bipolar violation (BPV) correction, line build-out, loop-code generator for fault isolation, front-panel LED status indicators, test jacks, power options and automatic keep-alive signal generation.

Part Number: 77115L2

Part Number: 77120-L2

Kentrox T Smart CSU Rack Mount

The T-SMART CSU provides in-service monitoring of both ESF and SF (D4) networks for early detection of developing problems. Both network and terminal sides are monitored. The performance results of the last 24 hours - stored in 15-minute intervals - can be accessed with an ASCII terminal.

Part Number: 77120-L2

• Can automatically dial up - via modem - network management center to report alarm conditions

Part Number: 77819-001

Kentrox 19" Rack Mount

The Kentrox 19" Rack Mount is a mounting tray for CSU for up to 2 units.

Part Number: 77819-001

Part Number: 77830

Kentrox RJ48H to RJ48C Converter

The Kentrox RJ48H to RJ48C Converter converts RJ48H Socket to 12 x RJ48C Jack Network Adapter.

Part Number: 77830

• Attaches to CSU chasis with RJ48H Cable
• Gives 1 RJ48C Plug for each of the 12 slots in the CSU

Part Number: 77840

Kentrox RJ48H to DA15 Converter

The Kentrox RJ48H to DA15 Converter converts RJ48H Socket to 12 x RJ48H Network Adapter.

Part Number: 77840

• This cable features an RJ48H plug which connects to 12-port DA15S converter panel

Part Number: 1203019L1

Kentrox RJ48H Socket 12xDA15P Conversional Panel

This adapter features an RJ48H socket to connect to a 12-port DA15P converter panel.

Part Number: 1203019L1

Part Number: 78075

Kentrox 2-Slot Universal Shelf (AC)

The Universal Shelf CSU/DSU delivers the benefits of a compact footprint, cleaner cable management, and simplified network management in a reliable CSU/DSU. Its flexibility and space-saving advantages make the Universal Shelf the best way to mix, match and manage a custom configuration of up to twelve T1 and 56k DSU/CSUs. It is ideal for large corporate networks, Internet Service Providers (ISPs), and carriers juggling multiple T1 lines. The 2-slot shelf lets you build and grow central site systems slot-by-slot, managing multiple shelves with a single Ethernet port.

Part Number: 78075

• Expandability preserves your investment
• Fully hot-swappable cards

Part Number: 78222

Kentrox D-Serv T1 SA AC DSU CSU

The D-SERV T1 is a single-port DSU combined with CSU functionality. It is T1, FT1, and DCS compatible, and supports frame-based services. The D-SERV accepts a serial data Signal of any multiple of Nx56 kbps or Nx64 kbps bandwidth from your DTE, up to 1.536 Mbps. DS0 channel allocation is selectable, contiguous or alternating, with optional channel location.

Part Number: 78222

• Accepts clocking from either network, internal, or DTE timing sources
• Timing allows the unit to be used in tail circuit applications
• Can be used as a high speed line driver, converting a data signal to T1 format and extending the signal up to 6,000 feet over two shielded twisted pairs